1. The connection of the small softened water equipment pipeline system should meet the "National Water Supply and Drainage Pipeline Construction Standards".
2. Small water softening equipment in the pipeline connection needs to pay attention to the size of the control valve head in accordance with the equipment to connect the inlet and outlet pipes.
3. The inlet and outlet pipes should be equipped with manual valves, and there should be bypass valves between the outlet pipes to avoid resin pollution and facilitate later maintenance.
4. The outlet of the water outlet should be equipped with a sampling valve, which can detect the water quality anytime and anywhere.
5. The length of the drain pipe should be shortened as much as possible, and various valves should not be installed. In the process of installing the pipeline of small softening water equipment, only PTFE tape can be used for sealing.
6. A certain space and height must be maintained between the drain pipe and the water surface of the drain to prevent siphoning.
7. There must be independent brackets between each pipeline.
