(1) Make the input voltage and current stable and prevent the electric control device from burning. A sealing cover should be installed outside the electronic control device to prevent moisture and water immersion.
(2) Regularly add some solid granular salt to the PE Brine (it is strictly forbidden to add refined salt or iodized salt), and make the salt solution in the PE Brine supersaturated. When adding salt, be careful not to sprinkle solid granular salt into the salt well to prevent salt bridges from forming on the salt valve and blocking the salt suction pipeline.
(3)Regularly check the air tightness of the ejector and the salt suction pipeline to prevent air leakage from affecting the regeneration effect.
